Apple Displays

13" AppleColor High-Resolution Monitor

13 inch AppleColor High-Resolution RGB MonitorThe 13" AppleColor High-Resolution Monitor was Apple's first color display for the Macintosh. It was introduced with the Mac II in March 1987 and uses a 13" Sony Trinitron CRT, which is curved horizontally but flat vertically. Because it uses a Trinitron display, there is a thin horizontal wire about one-third of the way up from the bottom, which you may see as a thin gray line. This is normal; it is not a defect. This display has a fixed resolution of 640 x 480 and uses Apple's DB-15 video connector (not to be confused with the smaller, higher density DE-15 VGA video connector).

The power and degauss buttons are on the back of the monitor; the brightness and contrast controls are on the right side. The monitor can sit on top of most desktop Macs and includes a height-adjustment bar that lets you raise the front of the display by one-half or one-quarter inch (12mm and 6mm respectively). Apple also sold a tilt-swivel base for this monitor.

Mac II with 13 inch RGB displayApple recommends against using this monitor at maximum brightness and suggests using a screen saver to avoid phosphor burn caused by static elements on the screen, such as the menu bar, drive icon, and Trash. To clean the screen, Apple suggests applying household glass cleaner to a clean cloth or paper towel and wiping the screen. You should avoid spraying glass cleaner directly on the CRT, as it could run down the screen, into the case, and damage the internal electrical circuitry.


Online Resources

About LEM Support Usage Privacy Contact

Follow Low End Mac on Twitter
Join Low End Mac on Facebook

Favorite Sites

Cult of Mac
Shrine of Apple
The Mac Observer
Accelerate Your Mac
The Vintage Mac Museum
Deal Brothers
Mac Driver Museum
JAG's House
System 6 Heaven
System 7 Today
the pickle's Low-End Mac FAQ

The iTunes Store
PC Connection Express
Macgo Blu-ray Player
Parallels Desktop for Mac

Low End Mac's store


Open Link